Skip to content
Roofing Handraisers

In-market data

Using homeowner data the right way: Meta, Google, TCPA and privacy

Updated November 16, 2026 · Roofing Handraisers

This page is practical guidance for roofing marketers. It is not legal advice. Laws differ by state, and platform policies change. Have an attorney review your privacy notice, your outreach scripts and your use of any homeowner data before you launch.

Using homeowner data well comes down to four habits. Put it into the channels that are built for it. Respect the platforms’ terms. Keep your outreach to people who have asked for it. Tell people what your website collects. The sections below take each one in turn and name the sources, so you can read the originals.

What is in-market homeowner data, and what is it for?

In-market homeowner data covers households whose recent web research suggests they are looking at roof work. You use it to target Meta ads, to choose which addresses get mail and to plan canvassing routes. The in-market data guide explains how it is built.

Those households researched a topic online. They did not fill out your form or ask for a call. That fact drives most of the rules below.

What do Meta’s custom audience terms require?

Meta publishes Custom Audience terms. The points that matter to a roofing advertiser or agency:

  • Rights and lawful basis. When data is uploaded to Meta to make an audience, the uploader represents that it has “all necessary rights and permissions and a lawful basis” to disclose and use that data.
  • Opt-outs. Data must not relate to people who opted out of that use. If someone opts out later, the terms say you will remove them from the audience.
  • No transfer of audiences. The terms say “You may not sell or transfer your Audiences,” with exceptions for sharing through Meta’s tools with service providers and licensing partners.
  • Agencies. An agency acting for an advertiser is an eligible user, and an agency that uploads on a client’s behalf warrants that it has authority as the advertiser’s agent and must bind the advertiser to the terms.
  • Restricted data. The terms bar data about children under 13, sensitive categories, and identifiers such as Social Security or credit card numbers.

What this means in practice:

  1. Use an audience only for the account and client it was built for. Do not copy it to other advertisers’ accounts.
  2. Remove anyone who tells you they want out, in the audience and on your mail list.
  3. Ask any data vendor, including us, how the data is collected and what lawful basis supports it. A vendor that cannot answer clearly is a risk to your ad account.
  4. Read Meta’s terms yourself, since they govern your account. We have summarized only a few points, and Meta can update the document.

What does Google Customer Match allow?

Google’s Customer Match policy says “you may only upload customer information that you collected in the first-party context.” Its examples are customers who bought on your website, signed up for marketing in your app, or joined a loyalty program in your store.

Third-party in-market data does not fit that definition. This is why Roofing Handraisers does not deliver audiences to Google Ads, and why you should not upload the address file or any identified-visitor list there as if you had collected it yourself.

The policy adds other rules worth knowing:

  • Your privacy policy must disclose that you share customer data with third parties that perform services for you.
  • You need consent where law or Google policy requires it.
  • You may not upload data about anyone under 13.
  • Ads may not imply knowledge of personal or sensitive information about the audience.
  • Google can remove Customer Match access, and repeated violations can lead to account suspension.

For Google, put your budget in search and local services ads. See the Google Ads for roofing guide.

Can you call or text the homeowners on the list?

We tell clients not to. The households in an in-market audience have not asked you to contact them. Treat the data as targeting data, not as a call list.

Two federal rules explain the caution:

  • Do Not Call. The FTC states that businesses that sell by phone must remove numbers on the National Do Not Call Registry from their lists, and that registration covers unwanted sales calls, both live and robocalls (FTC Do Not Call FAQs).
  • TCPA. The Telephone Consumer Protection Act also restricts autodialed and prerecorded marketing calls and texts. It carries private lawsuit exposure, and requirements depend on the type of message and contact method. We have not summarized the rule here, and an attorney should confirm what applies to you before any outreach by phone or text.

The safer path is to let homeowners come to you. They respond to an ad, call your number, or submit a quote form. Their contact is then theirs to give, and your follow-up rests on that request.

What about email?

CAN-SPAM covers commercial email. According to the FTC’s compliance guide, every commercial message needs a valid physical postal address and a clear way to opt out, requests must be honored within 10 business days, and each violating email can carry penalties of up to $53,088.

Note that CAN-SPAM sets conditions on sending, and other laws and platform rules may be stricter. Do not build an email list from in-market audience data. Email people who gave you their address through your forms, quotes or customer records.

What do you owe visitors if you use the identity-resolution pixel?

The pixel identifies anonymous website visitors by household. Your obligations start with telling visitors it is there.

  • Add a disclosure to your website privacy notice that says you use technology to identify visitors, what information it collects and how you use it.
  • Provide a way for visitors to opt out or ask for deletion, and honor those requests.
  • Keep the notice easy to find, such as a footer link on every page.
  • If you serve states with privacy laws, have counsel check how those laws treat identification and retargeting. We do not summarize any state law here, because requirements vary and change.

The website visitor identification guide covers pixel setup and how to use identified visitors in follow-up.

How should ads, mailers and door scripts be written?

Never reference how a homeowner was selected. This applies to every channel.

Channel Do Avoid
Meta ad copy Speak to the service and the area: “Roof replacement quotes in Plano” “We know you’ve been researching roofs”
Direct mail Lead with an offer, financing or a local project “You were identified as shopping for a roof”
Door script Introduce yourself, mention a nearby job, offer a free inspection “Our list shows you’re looking for a new roof”
Phone or text Respond to inquiries the homeowner started Unsolicited calls or texts to audience members

The reasons are practical. Google’s policy specifically prohibits ads that imply knowledge of personal information. A message about the service converts better anyway, since it speaks to the need the homeowner already has. The roofing canvassing guide has script examples that never touch the data.

What is a quick compliance checklist?

  • Audience used only for the client and campaign it was built for.
  • Privacy notice updated to disclose the pixel, with opt-out and deletion handled.
  • No cold calls or texts to audience members.
  • Email sent only to people who gave you their address, with a postal address and working opt-out.
  • Ad copy, mail and door scripts that never reference selection.
  • Opt-outs removed from audiences and mail files promptly.
  • Attorney review of the notice and scripts.

Common questions

Whether it is lawful depends on how the data was collected, your state and how you use it. Ask your vendor how the data is collected, and ask an attorney about your state.

Can I upload the data to Google Ads?

No. Google Customer Match accepts first-party data only. Use Meta, mail and canvassing for in-market audiences.

Do I need to disclose the pixel on my website?

Yes. Your privacy notice should say you use visitor identification, what it collects and how visitors can opt out. Have an attorney review the wording.

Can my agency use the audience for other clients?

No. An audience is bought for one client campaign, and Meta’s terms bar selling or transferring audiences. See the agency guide.

Questions about how your campaign would be set up? Book a 15-minute demo and bring your compliance questions.

Results with in-market data

All case studies →
Roofing
Canvassing

$2.5K → $30K

A $2,500 roofing list turned into $30,000 in revenue
A hyper-local list of households actively looking for roofing services, worked by door-knockers.

10–20% door-knocking conversion rate and about $30,000 in revenue from a $2,500 list.

Home services
Website pixel

CPA $92 → $41

Pest control: bookings up from 29 to 74 a month
A Florida residential pest control company used the identity-resolution pixel to identify anonymous local visitors and recover abandoned forms.

Bookings rose from 29 to 74 a month and cost per acquisition fell from $92 to $41.

Home services
Funnel

7% → 22% close rate

Remodeling in DFW: close rate from 7% to 22%
A Dallas–Fort Worth remodeling contractor built its funnel around high-intent local homeowner segments.

Close rate rose from 7% to 22% and average deal size from $19.8K to $32.4K.

Results reported by AudienceLab customers using the same in-market data and identity-resolution pixel behind Roofing Handraisers. Your results will vary. Source: AudienceLab case studies.

Keep reading

See how many homeowners in your market are shopping for a roof right now.

15-minute demo. We build the audience live and show you the count.