Skip to content
Roofing Handraisers

In-market data

What is in-market roofing data? Intent data for roofing companies

Updated November 16, 2026 · Roofing Handraisers

Intent data for roofing is a daily-refreshed list of households that have recently researched roof work. You use it to aim your Facebook and Instagram ads, your mailers and your door-knockers at homeowners who are shopping now, instead of at every rooftop in the zip code. This guide covers what the data contains, where the signals come from, how it reaches you, and where it fits next to the lead sources you already run.

What is in-market roofing data?

In-market roofing data identifies households in a defined area that have researched a roofing topic in the last few days. The topic might be roof replacement cost, metal roofing, storm damage repair or gutters. Each household enters the audience when the activity shows up and leaves when it stops.

At Roofing Handraisers, the unit you buy is an audience: one market segment in one metro, used in one campaign. “Homeowners shopping for a roof replacement in Dallas–Fort Worth” is an audience. The segments are roof replacement, storm and hail repair, roof repair, metal roofing, gutters and siding.

Marketers also call this “in market audiences,” “homeowner data” or just “in-market data.” The label varies. The idea is the same: you target by present behaviour instead of by guesses about who might want a roof.

How are the signals gathered and refreshed?

The signals are web-behaviour signals. When someone reads roof replacement cost guides, compares shingle and metal options or looks up how storm damage claims work, that activity is recorded against a household. Those households are matched to a mailing address and to the identifiers that ad platforms use.

Two things make this useful to a roofer:

  • Recency. The audience refreshes daily, so a household that researched a roof last week is in it and one that went quiet for months is out.
  • Location. You choose the metro, so your crews are not paying to reach homeowners outside the area you serve.

Roof shopping has a short window. A homeowner with a leak or an adjuster’s letter may collect three quotes in a couple of weeks. Data refreshed daily lets you be one of the three.

What is in-market data not?

It helps to place it against the other things roofers buy.

It is not a lead list. A lead filled out a form or called and asked to be contacted. The households in an in-market audience did none of that. They researched online. Calling or texting them cold is the wrong use, and the privacy and compliance guide explains why.

It is not a hail map. A hail swath tells you which roofs took hits. It does not tell you which owners are looking for a contractor. Many damaged roofs sit with owners who have not made a call. In-market data shows who is actually researching. The storm damage leads guide covers how to combine the two.

It is not ad management. Roofing Handraisers sells data only. It does not run your ads, manage campaigns or sell exclusive leads. You or your agency still build the creative, set the budget and answer the phone.

What are the three ways the data is delivered?

Every audience includes three delivery formats, plus reporting.

A Meta audience, synced daily

The in-market audience syncs automatically into your Meta (Facebook and Instagram) ad account through partner access. You select it as a custom audience when you build a campaign. Because it refreshes daily, the audience stays current without a re-upload. The roofing Facebook ads guide walks through campaign structure for it.

An identity-resolution pixel

A pixel goes on your website and identifies anonymous visitors by household. A visitor who reads your roof replacement page and leaves without filling out the quote form is no longer a ghost. You can retarget that household with ads or follow up through the channels your privacy notice covers. The website visitor identification guide covers setup and the disclosure you need.

A monthly address file

Each month you receive a file of in-market addresses for direct mail and canvassing. Your canvassers can route doors in neighborhoods with the most active households first. Mail can go to shoppers instead of the whole route. See the roofing canvassing guide and the roofing direct mail guide.

A weekly report rounds this out, and an audience goes live within 3 business days of ordering.

Why doesn’t it go into Google Ads?

Google Ads Customer Match accepts first-party data only. Google’s policy says “you may only upload customer information that you collected in the first-party context,” such as data from customers who bought on your site or joined your own loyalty program (Google Ads policy). A third-party in-market list does not meet that rule, so the data is not delivered to Google.

That shapes the channel plan. Meta, direct mail and canvassing take the in-market audience. Google search keeps doing what it does best, which is capturing people who type “roof replacement near me.” The Google Ads for roofing guide explains how to split the work.

What results have people reported?

These come from AudienceLab case studies. AudienceLab is the data platform behind Roofing Handraisers. The figures are as reported by its customers, none of them are Roofing Handraisers clients, and your results will vary. The full set is on the case studies page.

  • A roofing canvassing list that cost $2,500 returned about $30,000 in revenue, with a 10–20% door-knock conversion rate.
  • One advertiser swapped interest-based Facebook audiences for in-market audiences. Cost per lead fell from $111 to $30.
  • A Florida pest control company used the identity-resolution pixel to recover abandoned forms. Monthly bookings rose from 29 to 74, and cost per acquisition fell from $92 to $41.
  • A North Carolina landscaping agency reactivated pixel-identified visitors and reported 312 recovered leads, a 34% conversion rate and 9.6x ROI.

The pattern in these results: the data changes who sees the message, and the message and offer still have to be good.

How does in-market data compare with other targeting?

The table below places it next to the options already in your ad account. The full comparison has more detail.

Targeting method Based on Typical weakness for roofers
Interest targeting Pages followed, topics liked Reaches homeowners with no roof plans
Lookalike audience Similarity to your past customers Finds people who resemble buyers, not people buying now
Broad or Advantage+ The platform’s own prediction You give up control of who sees the ad
In-market audience Recent research behaviour, refreshed daily Smaller reach, and it needs a real offer and quick follow-up

Who is it for?

Two groups use it.

Roofing companies doing $1M or more a year that already market. If you run Meta ads, mail or a canvassing team and want a smaller share of the spend landing on the wrong households, read the guide for roofing companies. You need someone running the ads and a process to answer new inquiries the same day.

Roofing marketing agencies that run campaigns for roofers. You buy one audience per client campaign and it syncs into the client ad account you manage. The agency guide covers how that works.

How does it fit with the lead sources you already use?

In-market data supports the channels you already run. It does not replace SEO, local service ads or referrals. The roofing lead generation guide maps those channels and shows where each one leaks. The roofing marketing guide covers campaign types in more depth. If you are comparing data with purchased leads, start with the buy roofing leads comparison.

What should you ask before buying any homeowner data?

Ask the seller four things, whoever it is. How are the signals collected, and what lawful basis supports their use? How fresh is the audience, and how often does it refresh? Which channels can it legally and technically reach? What happens to your audience if you cancel? Vendors that answer in specifics are easier to trust than vendors that point to a match rate. The privacy and compliance guide covers the platform rules behind these questions.

How much does it cost?

One audience is $1,500 a month. Two audiences are $2,500 a month, which saves $500. Extra audiences are additional subscriptions, and enterprise plans for five or more audiences or exclusive markets are arranged by call. There is a 3-month minimum, then month to month. There are no per-record fees and no extra ad spend charged by Roofing Handraisers. Details are in the pricing section.

Common questions

Is intent data the same as a lead list?

No. A lead list holds people who asked to be contacted. Intent data holds households whose browsing suggests interest in roof work. You reach them with ads, mail and doors, and you wait for them to respond.

How often does the data update?

The Meta audience refreshes daily. The address file arrives monthly and the report arrives weekly.

Can I use the data in Google Ads?

No. Google Customer Match accepts first-party data only. Use Meta, mail and canvassing for the in-market audience, and use Google search for demand capture.

Can I call or text the households on the list?

You should not. Treat the data as targeting data. Read the privacy and compliance guide before you build a campaign, and ask your attorney about the rules in your state.

When you want to see the numbers for your market, book a 15-minute demo. We build the audience live and show you the household count.

Results with in-market data

All case studies →
Roofing
Canvassing

$2.5K → $30K

A $2,500 roofing list turned into $30,000 in revenue
A hyper-local list of households actively looking for roofing services, worked by door-knockers.

10–20% door-knocking conversion rate and about $30,000 in revenue from a $2,500 list.

Home services
Website pixel

CPA $92 → $41

Pest control: bookings up from 29 to 74 a month
A Florida residential pest control company used the identity-resolution pixel to identify anonymous local visitors and recover abandoned forms.

Bookings rose from 29 to 74 a month and cost per acquisition fell from $92 to $41.

Home services
Funnel

7% → 22% close rate

Remodeling in DFW: close rate from 7% to 22%
A Dallas–Fort Worth remodeling contractor built its funnel around high-intent local homeowner segments.

Close rate rose from 7% to 22% and average deal size from $19.8K to $32.4K.

Results reported by AudienceLab customers using the same in-market data and identity-resolution pixel behind Roofing Handraisers. Your results will vary. Source: AudienceLab case studies.

See how many homeowners in your market are shopping for a roof right now.

15-minute demo. We build the audience live and show you the count.