Skip to content
Roofing Handraisers

Lead generation guide

Storm and hail damage leads: reaching homeowners after the storm

Updated November 16, 2026 · Roofing Handraisers

Storm damage leads are homeowners whose roofs may need repair after hail or wind, and who are ready to talk to a roofer. A storm creates a short window. Within days, every contractor in town is knocking doors and bidding for the same streets. This guide covers how that window works, what a hail map can and cannot tell you, and how to use in-market data so your crews and your ads go to the households that are actually shopping. It is one part of our wider guide to roofing lead generation.

How do storm damage leads work?

A storm event produces demand in three waves.

  1. Right after the storm. Homeowners notice leaks or dented gutters. Some call a roofer. Many wait to see what the insurer says.
  2. Claims and inspections. Households research the claim process, adjusters and deductibles. This is when roof questions peak.
  3. Replacement decisions. Approved claims turn into replacement quotes, and the homeowner picks a contractor.

Each wave needs a different message. Early on, offer a free inspection. During claims, offer help documenting damage. Later, offer a clear scope and a start date. Your crews also have a ceiling. If you can tear off only so many roofs a week, a flood of appointments makes the backlog worse.

What can a hail map tell you?

A hail map shows where hail fell and how large it was. It is a good tool for picking territory. It answers where to send reps and which ZIPs to include in a campaign.

A hail map does not tell you which homeowner is shopping. Inside a hit neighborhood, some roofs are damaged, some are not, some belong to renters, and some owners already signed with another contractor. A rep knocking every door in order spends hours on households with no interest.

How does in-market data add to a hail map?

In-market data is a daily list of households that researched roof topics in the last few days. Roofing Handraisers sells it by segment, and storm and hail repair is its own segment. Overlay it on your storm territory:

  • the map picks the neighborhoods;
  • the audience picks the households inside them;
  • the address file puts those households at the top of the route.

Each audience is one segment in one metro, so storm repair in Dallas-Fort Worth is a separate audience from roof replacement in the same metro. The in-market data guide explains how the signals work and why this is different from a lead list.

How do you reach storm damage leads with Meta ads?

A daily in-market audience syncs into your Meta ad account through partner access. Build a storm campaign on it:

  • Run a short inspection offer in the first wave and a claim-help message in the second.
  • Keep the creative local. Name the storm and the city.
  • Retarget visitors your website pixel identifies, so a homeowner who read your storm page sees you again.
  • Track cost per booked inspection and cost per signed job, not only cost per lead.

One AudienceLab case study reports a local operator whose paused ad account restarted with in-market targeting. Cost per click fell from over $10 to $3.84, with 27 conversions in 6 days on under $100 of spend. That account was not a roofer, and it shows what targeting can change inside a single account. Details are on the case studies page. The roofing Facebook ads guide goes deeper on campaign structure.

How do you canvass after a storm with in-market data?

Each audience includes a monthly address file. Load it into your canvassing app and mark those addresses as the first stops. Reps spend the first hours of each day on households that are researching a roof, then fill in the rest of the route.

One AudienceLab customer reports a $2,500 roofing canvassing list that returned about $30,000 in revenue, with a 10 to 20 percent door-knock conversion rate. Those are their numbers, and your results depend on your market and your reps. For route planning and scripts, read roofing canvassing.

Two rules for your reps:

  • The door script never mentions how you chose the house. Open with the storm, your inspection and your company.
  • Respect no-soliciting signs and local registration rules. Many cities and states regulate door-to-door contractors, and some add rules after a declared disaster, so check yours before the crews go out.

Storm damage leads compared

Approach What it gives you Limit
Hail map alone Affected neighborhoods No signal on who is shopping
Shared storm leads Homeowners who asked for quotes Several roofers get the same lead
Door knocking, in order Wide coverage Hours on uninterested homes
Hail map plus in-market data Households shopping inside the hit area Needs someone running ads and a same-day follow-up

What do you need to run a storm campaign?

  • A person or agency running your Meta ads.
  • A crew schedule, so you know how many inspections you can take.
  • A same-day callback process. Storm demand cools fast.
  • A website where the pixel can go, with a privacy notice that discloses it.

The data does not call homeowners for you. Never cold-call or text households from it. One audience costs $1,500 a month and two cost $2,500, with a three-month minimum. See the pricing section, or read how owners use the data.

If you are comparing storm lead sources, our guide on whether to buy roofing leads covers shared and exclusive options, and the roof replacement leads guide covers the buyers who sign after the claim clears.

Common questions

Are storm damage leads the same as hail leads?

Hail leads are a subset. Storm damage leads also cover wind, falling limbs and other weather. The targeting approach is the same: choose territory by storm, then target households by shopping behavior.

How soon after a storm should I start?

As soon as your crews can handle inspections. Demand arrives in waves, so a campaign that adjusts its message over several weeks outperforms a single blast.

Can I use in-market data for storm work in Google Ads?

No. Google Customer Match accepts first-party data only, so the data is not delivered to Google. Use Meta, mail and canvassing for in-market reach.

How do I start?

Book a demo. We build the audience live on the call, and you see the household count for your storm territory before you buy.

Results with in-market data

All case studies →
Roofing
Canvassing

$2.5K → $30K

A $2,500 roofing list turned into $30,000 in revenue
A hyper-local list of households actively looking for roofing services, worked by door-knockers.

10–20% door-knocking conversion rate and about $30,000 in revenue from a $2,500 list.

Home services
Website pixel

CPA $92 → $41

Pest control: bookings up from 29 to 74 a month
A Florida residential pest control company used the identity-resolution pixel to identify anonymous local visitors and recover abandoned forms.

Bookings rose from 29 to 74 a month and cost per acquisition fell from $92 to $41.

Home services
Funnel

7% → 22% close rate

Remodeling in DFW: close rate from 7% to 22%
A Dallas–Fort Worth remodeling contractor built its funnel around high-intent local homeowner segments.

Close rate rose from 7% to 22% and average deal size from $19.8K to $32.4K.

Results reported by AudienceLab customers using the same in-market data and identity-resolution pixel behind Roofing Handraisers. Your results will vary. Source: AudienceLab case studies.

See how many homeowners in your market are shopping for a roof right now.

15-minute demo. We build the audience live and show you the count.